| Author |
Message |
    
307 (307)
| | Posted on Thursday, May 31, 2001 - 8:01 am: | 
|
Many people have asked me for this , here it is...
Simple Channel modification for the following models:
Galaxy DX-949, DX-959, DX-2547
Texas Ranger TR-396, TR-396F, TR-696, TR-696F, TR-696FSSB Base, TR-399WX, TR-699WX,
1.On the Main board, just to the right and below the PLL 8719 locate J33.
2.Locate wires in in J33 marked P6 and P5. Take note of their colors.
3.Cut open these two control lines and place a SPST switch in line with each of them.
4. This will manipulate the programming between the LSB (Least Significant BIT) and MSB (Most Significant BIT)to enable more channels. |
david
| | Posted on Thursday, May 31, 2001 - 10:17 am: |
|
What coverage will this give you? |
307 (307)
| | Posted on Thursday, May 31, 2001 - 12:37 pm: |
|
26.695 through 27.965. This radio is an exact Galaxy 949/959 series. Very limited. |
Jerry Bryant
| | Posted on Monday, June 11, 2001 - 12:26 pm: |
|
Does this mean that the radios will be able to go up and down approx.40 channels once modified? |
307 (307)
| | Posted on Monday, June 11, 2001 - 12:37 pm: |
|
Just about.... |
Jerry Bryant
| | Posted on Thursday, July 26, 2001 - 6:07 pm: |
|
Is there a way to get more slide from the clarifiers with these radios? I have the Galaxy DX959 and married the clarifier to slide on both transmit and recieve.Currently I only get 1kc of slide and would like more comparable to radios I've owned in the past which would slide about 5kc up and down. |
Thunderbolt
| | Posted on Wednesday, September 05, 2001 - 3:02 pm: |
|
On the radios above with freq counter ,do the extra freqs show up on the display? |
307 (307)
| | Posted on Monday, September 10, 2001 - 9:26 pm: |
|
Yes they do...
307 |
Thunderbolt
| | Posted on Wednesday, September 12, 2001 - 10:30 am: |
|
How do you unlock the clarifier to go 10kc?on transmit for the TR-396F |
|
