| Author |
Message |
    
Leonard
| | Posted on Saturday, January 31, 2004 - 3:55 pm: | 
|
I have a Turner +2 transistorized SSB and astatic golden eagle I would like to hook up for a RCI 2980 WX.
what is the wire set up for these mic's.
On the turner +2 should it be electronic or relay?
Any information would help Thank you 73's CEF #189 Len So.Minnesota |
Leonard
| | Posted on Tuesday, February 03, 2004 - 8:48 pm: |
|
Ok so I can not spell can any one help out please.
For the mic wiring. |
Tech808
| | Posted on Tuesday, February 03, 2004 - 10:44 pm: |
|
Leonard,
The Standard Mic Wiring for your 2980WX is:
Pin #1 ~ SHIELD
Pin #2 ~ AUDIO
Pin #3 ~ TRANSMIT
Pin #4 ~ RECEIVE
Look to the LEFT of the Forum here and you will see Tools and Mic. Wiring
CLICK on Mic. Wiring and it will show you the wiring for the Astatic as well as the Turner.
Hope this helps.
Lon
Tech808 |
Leonard
| | Posted on Wednesday, February 04, 2004 - 9:55 am: |
|
Thank you Lon
I did look there but I seen 6 hook up's.
I just assumed it was for the other radios oop's.
I was looking for a code like an example
1-Red
2-Black
3-Ground
4-Sheild
But I do Thank you and sorry for being a pest.
73's cef#189 Len |
Tech808
| | Posted on Wednesday, February 04, 2004 - 7:38 pm: |
|
Well it is confusing but if you look at most of the codes the First 4 pins are mostly the same in all RCI / Ranger Radio's.
And Pin 5 & 6 are used for the Up & Down Button's. |
Tech808
Moderator
Username: Tech808
Post Number: 1673
Registered: 8-2002
| | Posted on Thursday, March 04, 2004 - 5:33 pm: |
|
Leonard,
The standard Mic wire colors in the Turner +2 are:
RED = TRANSMIT
WHITE = AUDIO
BLACK = RECEIVE
SHIELD = GROUND
I apologize as I was going back reading post's and noticed I forgot to include the Turner Wire Color Code for you.
Lon
Tech808 |
