| Author |
Message |
    
Pancake
Junior Member
Username: Pancake
Post Number: 25
Registered: 3-2002
| | Posted on Thursday, March 04, 2004 - 10:29 pm: | 
|
ive got an old tug8 base and i am putting together a mike...i have a head coming because i didnt have one for it but the person that i got this from screwed around and disconnected the wires for the cord and the battery connector inside the base to be an idiot i guess...
can anyone get me a diagram or a fairly descriptive explanation as to where the 4 mic cord wires run and the battery connector wires also
any help is much appreciated..you can email me at littlejuggalo20@aol.com |
Tech808
Moderator
Username: Tech808
Post Number: 1685
Registered: 8-2002
| | Posted on Friday, March 05, 2004 - 9:10 am: |
|
Pancake,
Well get ready and I will try and explain this the best I can for you.
Turn the base of the microphone upside down so that the Volume Control is Next to you on the LEFT and Battery Holder is on your RIGHT.
You will see a Brown Bar with a printed Circuit board attached to the TOP of it.
Yow will see 3 Double Ended Solder Bars then a space with a Screw in the 4th one going to circuit board, then 2 more then another one with a screw in it going to circuit board and then 2 more. Should look like below.
"S" / means Screw
"-" = means Space between 3 & 5 on bottom row.
0 0 0 S 0 0 S 0 0 / Top Row
__________________________
0 0 0 - 0 0 0 0 0 / Bottom Row
1 2 3 4 5 6 7 8 9
OK here we go.
Volume Control has "3" legs on the LEFT of it.
"RED" Battery wire connect's to the TOP LEFT Pin (away from you) of VOLUME CONTROL (It should also have a small Purple wire soldered to it.
"BLACK" Battery wire connect's to the Bottom row of Pin #2 Closest to you.
NOW for The MIC CORD!
The "CLEAR COATED / White" Mic wire connect's to PIN #1 on the Bottom row closest to you and "it should have a small White wire soldered to the Top of pin."
The "BLACK" Mic Wire connect's to PIN #3 on the Bottom row closest to you and "it should have a small Blue wire soldered to the Top of this pin."
The "RED" Mic Wire connect's to PIN #5 on the bottom row closest to you and "it should have a small Red wire soldered to the top of this pin."
The BARE/ Shield Mic wire should go to PIN #8 on bottom row closest to you and it should have a small Yellow wire soldered to the top of this pin. And leave maybe 1/2 inch of SHIELD wire to solder to PIN #7 on the bottom also. (Pin #7 has screw in top).
NOTE! Shield Wire CONNECT's to BOTH PIN #8 (first) and then PIN #7
NOTE! PIN #6 / 6th from the left, has "NO" wires connected to it!
That's it!
Hope this help's.
Lon
Tech808 |
Pancake
Junior Member
Username: Pancake
Post Number: 26
Registered: 3-2002
| | Posted on Friday, March 05, 2004 - 7:38 pm: |
|
<<<pancake walks in reads this looks at his mic and kisses lon's feet
thanks for all youre help...i should have me a mic put together as soon as i can get my new head that should be coming from a friend of mine in a few days...
73's the one the only ...the smallfry here in central n.y. |
Tech808
Moderator
Username: Tech808
Post Number: 1692
Registered: 8-2002
| | Posted on Friday, March 05, 2004 - 8:50 pm: |
|
Pancake,
It is a Nice thought? Butttttt I have size 14 1/4 feet.
Honestly though I just try and help when ever I can and where ever I can.
Thank you for the Nice Comment's.
Lon
Tech808 |
Pancake
Junior Member
Username: Pancake
Post Number: 27
Registered: 3-2002
| | Posted on Sunday, March 07, 2004 - 6:44 pm: |
|
ok one more question...can anyone help me out with a wiring code for this mic to a uniden pc76xl?
thanks in advance,dave in n.y. |
Pancake
Junior Member
Username: Pancake
Post Number: 28
Registered: 3-2002
| | Posted on Tuesday, March 09, 2004 - 8:22 am: |
|
hey all,I ALREADY GOT A WIRING CODE THANKS THOUGH
808 once again,thanks for youre help.i got the head,and got a connector on the end hooked it up to my galaxy fortunately enough the radio stayed on freq for me to test the mic and it works G R E A T im going to post a link to the site where i got my wiring code in this forum but ill start a new topic that way people find the link |
