| Author |
Message |
    
sidewinder107
| | Posted on Thursday, November 22, 2001 - 4:42 am: | 
|
ya i see someone else asked about volting the finals in a rci 2950 and a person repled with this Find the "mirror board" near the back of the radio, jumpering 3 test points. remove the mirror board and unsolder the clip that is the center test point. Cut this clip in half vertically and re-install into the front hole of the test point...the result will now be an open hole on the back of that test point. Next, run a wire from the hole of the now-modified center test point, to pin 3 of Q51 (13.8v main power). Replace the mirror board in the clips and make sure the front 1/2 of the modified clip is secure against the mirror board...solder it if you have to.now can this be done to a galaxy saturn if so what is the point of doing this can i get more power still learning this stuff please let me know thanks
-------------------------------------------------------------------------------- |
|
