Author |
Message |
Excope
New member Username: Excope
Post Number: 3 Registered: 8-2004
| Posted on Monday, September 13, 2004 - 1:33 am: |
|
I had a friend loan me a Silver Eagle D104 desk mic with all of the K beep stuff in the base. It had the three little slide switches in it. He said he had bought if off of one of his friends a long time ago and that the friend had had all of this put into the mic. I was wondering if I or andbody for that matter can still get there hands on the board or what ever is needed to ad this to a standerd D104 modulating desk mic? Thanks, Excope, CEF 386 |
Yankee
Intermediate Member Username: Yankee
Post Number: 275 Registered: 7-2003
| Posted on Monday, September 13, 2004 - 7:40 pm: |
|
Not knowing what each switch does, it's had to say what you need to get to put into a regular D-104. I for one wouldn't do anything to any Astatic desk microphone, now that they are no longer being made and the value of them keeps going up and up. Right now like new Silver Eagles are at a premium of about $150.00 and the sky is the limit as they get older, depending on the condition of the microphone and most of all the cord in uncut condition is worth whatever someone will pay. 73, Carl CEF-357 |
Dindin
Intermediate Member Username: Dindin
Post Number: 369 Registered: 2-2004
| Posted on Monday, September 13, 2004 - 8:56 pm: |
|
It sounds like they put in a board out of a Silver-K Night Eagle.are the switches labled;Vox,rb and K ? |
|