Author |
Message |
Sonwatcher
Junior Member Username: Sonwatcher
Post Number: 15 Registered: 2-2004
| Posted on Thursday, November 25, 2004 - 3:07 pm: |
|
Does anyone know how to gain access to the element on this mic ? Thanks |
Dindin
Intermediate Member Username: Dindin
Post Number: 447 Registered: 2-2004
| Posted on Thursday, November 25, 2004 - 8:05 pm: |
|
Sonwatcher,to gain access to the element in all of the turner +3 style mics look at the back of the mic head.carfully pry off the turner emblem and you will find a phillips screw underneath.small word of caution,it is almost a 3 handed operation to get it back together.also replacing the element itself or tightening up a loose head is the only reason to open the head up.hope this helps. |
Poppathree
Junior Member Username: Poppathree
Post Number: 23 Registered: 2-2004
| Posted on Thursday, November 25, 2004 - 8:34 pm: |
|
I haven't removed the head on mine, but carefully remove the gold sticker on the back of the head- there is a screw in there that might do just that...........73,Lee |