Author |
Message |
Thegriz
New member Username: Thegriz
Post Number: 2 Registered: 3-2005
| Posted on Monday, March 21, 2005 - 7:38 pm: |
|
Would appreciate if someone could provide the wiring configuration to wire a D-104 to a vintage Royce 629 mobile CB. The Royce 639 is circa late '70, and had a "dynamic" stock microphone. The radio has a six pin configuration. |
Tech808
Moderator Username: Tech808
Post Number: 5307 Registered: 8-2002
| Posted on Monday, March 21, 2005 - 9:59 pm: |
|
Thegriz, WELCOME TO THE COPPER FORUM! PIN #1 ~ WHITE PIN #2 ~ SHIELD & BLUE PIN #3 ~ RED PIN #4 ~ BLACK YELLOW N/C Hope this helps, Lon Tech808 CEF808 N9OSN
|
Thegriz
New member Username: Thegriz
Post Number: 3 Registered: 3-2005
| Posted on Tuesday, March 22, 2005 - 2:42 pm: |
|
Lon...thanks for the response! Another qeustion please. I have the stock dynamic also for the Royce 639, and the shield wire is off the pin. Which pin does the shield of the stock mic attach to? Thanks again, Griz |
Tech808
Moderator Username: Tech808
Post Number: 5321 Registered: 8-2002
| Posted on Wednesday, March 23, 2005 - 7:47 am: |
|
Thegriz, Stock Mic Wiring for Royce Models: 1-600A / 1-600B / 1-604 / 1-607 / 1-608 / 1-611 / 1-612 / 1-620 / 1-621 / 1-631 / 1-639 / 1-648 / 1-651 / 1-619 PIN #1 ~ MODULATION PIN #2 ~ SHIELD PIN #3 ~ TRANSMIT PIN #4 ~ RECEICVE Hope this helps, Lon Tech808 CEF808 N9OSN |