| Author |
Message |
    
Akbowtie
New member
Username: Akbowtie
Post Number: 1
Registered: 5-2005
| | Posted on Saturday, May 28, 2005 - 2:02 am: | 
|
Any chance that someone might know the stock mic wiring for a cbs1000 or even a stock cobra to the cbs1000 ? |
Bruce
Senior Member
Username: Bruce
Post Number: 2731
Registered: 9-2003
| | Posted on Saturday, May 28, 2005 - 10:32 am: |
|
SEE if this might work
 |
Akbowtie
New member
Username: Akbowtie
Post Number: 3
Registered: 5-2005
| | Posted on Saturday, May 28, 2005 - 12:56 pm: |
|
Thanks Bruce I'll look at that and see if thats it.
Funny thing, about 5 minutes after i posted the question, I dug out my old es9200 that was still wired correctly for the cbs1000.
Starting to rumage through some of my old junk thats been packed away for a long time 
Thanks again. |
Yankee
Advanced Member
Username: Yankee
Post Number: 603
Registered: 7-2003
| | Posted on Saturday, May 28, 2005 - 7:41 pm: |
|
Wires the same as 5 pin Cobras and Unidens.
Pin 1=Audio
Pin 2=Shield
Pin 3=Receive
Pin 4=Floating ground
Pin 5=Transmit
I just happen to have a like new Cherokee CBS-1000 in my collection and it is quite an interesting little radio. |
Yankee
Advanced Member
Username: Yankee
Post Number: 606
Registered: 7-2003
| | Posted on Saturday, May 28, 2005 - 8:16 pm: |
|
Bruce: What you sent is a six pin circuit and not correct. |
Bruce
Senior Member
Username: Bruce
Post Number: 2736
Registered: 9-2003
| | Posted on Saturday, May 28, 2005 - 8:22 pm: |
|
ok its not the same as my Cherokee it has a 6 pin plug |
Akbowtie
New member
Username: Akbowtie
Post Number: 8
Registered: 5-2005
| | Posted on Sunday, May 29, 2005 - 12:58 pm: |
|
Mine has a 6pin also |
Yankee
Advanced Member
Username: Yankee
Post Number: 611
Registered: 7-2003
| | Posted on Sunday, May 29, 2005 - 1:47 pm: |
|
sorry guys, I've never seen A CBS-1000 with a six pin plug. |
Akbowtie
Junior Member
Username: Akbowtie
Post Number: 18
Registered: 5-2005
| | Posted on Tuesday, June 07, 2005 - 8:25 pm: |
|
OOooops Mines a 5 pin too! My RCI is a 6
But i have it working great ! |
