| Author |
Message |
    
Allagator
Advanced Member
Username: Allagator
Post Number: 652
Registered: 9-2002
| | Posted on Wednesday, July 06, 2005 - 6:49 pm: | 
|
ive got a Palomar 90A that used to drive a Palomar 400 some years back but now the 90A keys nothing and i cant get the 400 to work !
but if i runn my trans varmit ssl-100 into it it works fine ! now could someone tell me how to get the 400 to work with a lower deadkey ??
Thanks ! ANYONE !
Allagator |
Bigbob
Senior Member
Username: Bigbob
Post Number: 2034
Registered: 12-2001
| | Posted on Sunday, July 10, 2005 - 10:40 am: |
|
What pills are in it?Bigbob |
Allagator
Advanced Member
Username: Allagator
Post Number: 653
Registered: 9-2002
| | Posted on Sunday, July 10, 2005 - 6:08 pm: |
|
the old 90A has 2-6LF6 tubes in it and as soon as i get the 400 back ill let you know what tubes it has in it !
but the guy i took it to asid the driver tube had been bypassed to run with a driver amp !
so should i run the Pal 90A into it or have him fix the driver setup in the amp ?
Thanks Again ! Allagator |
Bigbob
Senior Member
Username: Bigbob
Post Number: 2039
Registered: 12-2001
| | Posted on Monday, July 11, 2005 - 6:20 am: |
|
Have him fix the driver,you'll have much better audio and the tubes will last tons longer,you know less problems with splatter,but if you must have the n'th degree of power then drive it with the 90a the tech will like your business,because you not only stress the tubes but the caps and transformers and rf parts has tranformers but they're not cheap,neither are the caps.Bigbob |
Allagator
Advanced Member
Username: Allagator
Post Number: 654
Registered: 9-2002
| | Posted on Monday, July 11, 2005 - 3:50 pm: |
|
Thanks BigBob !!!
i just called him and had him fix the driver setup back the way it should !!!!
Thanks Again !!!
Allagator |
