Author |
Message |
Salty_bones
New member Username: Salty_bones
Post Number: 9 Registered: 5-2005
| Posted on Thursday, July 07, 2005 - 10:06 pm: |
|
I would like to know how to wire this Syncron MP7000RB Echo Base Microphone up to a 4 pin Cobra and also a 5 pin uniden Washington. Thanks! |
Tech808
Moderator Username: Tech808
Post Number: 6283 Registered: 8-2002
| Posted on Thursday, July 07, 2005 - 11:35 pm: |
|
Salty_bones, Cobra 4 Pin Mic Wiring PIN #1 ~ SHIELD PIN #2 ~ AUDIO PIN #3 ~ TRANSMIT PIN #4 ~ RECEIVE Washington 5 Pin Mic Wiring PIN #1 ~ AUDIO PIN #2 ~ SHIELD PIN #3 ~ RECEIVE PIN #4 ~ Sw. Wire PIN #5 ~ TRANSMIT As for the Syncron I have no idea what the wiring code is. Is it wired for any kind of radio now? And if so what is/was it being used on? Hope this helps, LOn Tech808 CEF808 N9OSN |
Salty_bones
Junior Member Username: Salty_bones
Post Number: 10 Registered: 5-2005
| Posted on Friday, July 08, 2005 - 3:35 pm: |
|
I think they are pre wired for Midland radios. Copper use to carry them and they are still on the copper site but not for sale. |
Salty_bones
Junior Member Username: Salty_bones
Post Number: 14 Registered: 5-2005
| Posted on Wednesday, July 13, 2005 - 9:45 pm: |
|
Ok I have been trying to wire this Syncron MP7000RB Echo mic up to my Uniden Washington Base 5 pin. 1. Yellow 2.Shield 3.Black 4.------ 5.Blue It worked roger beep and all put when I turned up the volume it cut out and made weard sounds. I then used this: 1.Yellow 2.------ 3.black 4.shield + red 5.blue Using this the volume works fine and the radio talks fine but when you turn on the roger beep and key up the mic you you lose your recieve and the mic does not modulate. Any help would be great. Thanks for you time. |