| Author |
Message |
    
Allagator
Advanced Member
Username: Allagator
Post Number: 665
Registered: 9-2002
| | Posted on Saturday, July 23, 2005 - 1:54 pm: | 
|
i was loking to install a dial-watt in this radio and i cant find the rite jumper to remove to add the dial-watt in place of the jumper !
any one know what this is ??
Thanks !!
Allagator
CEF115
|
Allagator
Advanced Member
Username: Allagator
Post Number: 667
Registered: 9-2002
| | Posted on Monday, July 25, 2005 - 6:21 pm: |
|
humm no one knows ?????
that is strange ! LOL
|
Twowatt
Junior Member
Username: Twowatt
Post Number: 48
Registered: 7-2005
| | Posted on Wednesday, July 27, 2005 - 11:36 pm: |
|
allagator,
which "dial-a-watt" are u referring to? the one i am most familiar with uses several diodes. u lift up one end of the anti-spiking diode and using a multi-position wafer switch, add more diodes. each rotation of the sw puts another diode in series.
if u r referring to a continously variable output configuration, u still lift the cathode side of the diode and install it there.
there is a post somewhere on here that has a drawing of such a device, but i cannot find it.
if no one else can direct u to it, email me and i'll email u a version i have here somewhere  |
Allagator
Advanced Member
Username: Allagator
Post Number: 670
Registered: 9-2002
| | Posted on Thursday, July 28, 2005 - 4:57 pm: |
|
i was looking for the one like you can make for a cobra 29 ltd classic ! by removing JP36 and adding a 25V-100uf cap and 2 100ohm resistors and runing 2 wires to the delta tune ! but i was told by a guy here close that it cant be done in a 89 XLR ! so im looking for anyway i can turn it down to run a amp then power it back up for the local ragchewing !
Thanks for any info you can find !
Allagator
|
Twowatt
Junior Member
Username: Twowatt
Post Number: 49
Registered: 7-2005
| | Posted on Wednesday, August 03, 2005 - 10:38 pm: |
|
Allagator,
i have 2 drawings for u, email me so i can send them to u. i don't think they'll post well (?)
regards |
