| Author |
Message |
    
Duck246
Intermediate Member
Username: Duck246
Post Number: 105
Registered: 8-2004
| | Posted on Tuesday, November 29, 2005 - 1:53 am: | 
|
Kenwood MC-60a to Magnum S-45
1 Ground + Sheild
2 Audio
3 TX
When plugged in the talkback comes on full blast.. Why? |
Tech808
Moderator
Username: Tech808
Post Number: 8512
Registered: 8-2002
| | Posted on Tuesday, November 29, 2005 - 9:49 pm: |
|
Duck,
The Wiring / Microphone Pin Output on the radio and the Stock Mic Wiring is;
Pin #1 ~ Microphone Audio / White
Pin #2 ~ Receive / Black
Pin #3 ~ Transmit / Red
Pin #4 ~ Down(Up w/22K Ohm Resistor) / Blue
Pin #5 ~ Ground / Shield w/yellow sleeve
Pin #6 ~ +13.8VDC / Brown
NOTE!
MAKE SURE NOTHING COMES INTO CONTACT WITH PIN #6 OF THE RADIO OR IT CAN SHORT/BLOW THE CPU IN THE RADIO OUT INSTANTLY!
Hope this helps,
Lon
Tech808
CEF808
N9OSN
|
Duck246
Intermediate Member
Username: Duck246
Post Number: 106
Registered: 8-2004
| | Posted on Wednesday, November 30, 2005 - 4:55 am: |
|
You will have to excuse me, I meant on the 4 pin side. |
