| Author |
Message |
    
Bookworm
New member
Username: Bookworm
Post Number: 1
Registered: 1-2006
| | Posted on Wednesday, January 25, 2006 - 9:40 am: | 
|
I recently purchased a Siltronix Model 90 VFO (with a 1 stamped on the back) to installl on my SBE Console II. I also purchased the manual at the same time from a different seller, but three weeks later still no manual. Can anyone tell me the attachment points, shoot me a schematic, etc., on the hookup? Thanks. |
Bookworm
New member
Username: Bookworm
Post Number: 4
Registered: 1-2006
| | Posted on Monday, January 30, 2006 - 12:06 pm: |
|
Anyone? |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 2331
Registered: 7-2004
| | Posted on Monday, January 30, 2006 - 1:02 pm: |
|
remove channel 23 xtal from radio, solder center conductor of coax from VFO to vacated xtal hole nearest switch contact. solder braid to ground side of xtal pad.
turn radio to channel 23 & tune through VFO.
i had instruction sheet somewhere. most of it explains troubleshooting & the problems that WILL be experienced using a VFO on a CB. |
Bookworm
New member
Username: Bookworm
Post Number: 5
Registered: 1-2006
| | Posted on Tuesday, January 31, 2006 - 12:39 pm: |
|
Cool, thanks. Works like a charm. Had to make a few adjustments after hookup. |
