Author |
Message |
Jameslarson
Junior Member Username: Jameslarson
Post Number: 14 Registered: 4-2006
| Posted on Wednesday, April 12, 2006 - 2:15 pm: |
|
I cannot believe I forgot how to do this. Please help. It is a 148 gtl (5 pin mounted on left side of radio). The microphone is the good ole d104-M6B. I forgot how to wire it up. Please help. Thanks. |
Tech808
Moderator Username: Tech808
Post Number: 9722 Registered: 8-2002
| Posted on Wednesday, April 12, 2006 - 5:23 pm: |
|
Jameslarson, You will need the ASTATIC D104M6B wired as follows for the COBRA 148 GTL 5 Pin Radio: PIN #1 ~ WHITE PIN #2 ~ SHIELD PIN #3 ~ BLACK PIN #4 ~ BLUE PIN #5 ~ RED YELLOW N/C Hope this helps, Lon Tech808 CEF808 N9CEF CVC#2 |
Jameslarson
Junior Member Username: Jameslarson
Post Number: 16 Registered: 4-2006
| Posted on Wednesday, April 12, 2006 - 6:42 pm: |
|
Thanks. PS, When I took the back off the D104 to change the battery, I noticed the shield kind of just lays there. Then there is a silver small plate that looks like the shield makes contact with when the back is put back on. Why is that not soldered though? Weird. |