| Author |
Message |
    
Freebird
Intermediate Member
Username: Freebird
Post Number: 436
Registered: 1-2003
| | Posted on Monday, June 12, 2006 - 9:20 pm: | 
|
Ok call me dumb but i can't remember how i hook an amp radio and meter inline so i can see how many watts my amp is doing..I have tryed for the past 2 hours so i thought i would just post this.hooking up just the meter with a radio is easy or just the amp with the radio but how do i go about hooking up all 3?on the back of my amp it says Xmit AND ANTENNA.ON THE BACK OF MY METER IT SAYS TRANSMITTER AND ANTENNA.what jumpers go where im stuck.sure wish i could see a pic of how its all hooked up |
Tech808
Moderator
Username: Tech808
Post Number: 10271
Registered: 8-2002
| | Posted on Monday, June 12, 2006 - 10:22 pm: |
|
Freebird,
Radio ~ Jumper ~ AMP ~ Jumper ~ Meter ~ Antenna
Hope this help's,
Lon
Tech808
CEF808
N9CEF
CVC#2 |
Thehobo
Member
Username: Thehobo
Post Number: 82
Registered: 2-2004
| | Posted on Tuesday, June 13, 2006 - 12:26 pm: |
|
freebird, hook up as follows,== from radio coax goes to xmit of amp, then an other jumper goes from antenna on amp to transmiter on meter, then the antenna coax goes to antenna on meter!!enjoy!!
thehobo
269150 am
monitor ch |
|
