| Author |
Message |
    
Big_rigger
Junior Member
Username: Big_rigger
Post Number: 37
Registered: 8-2005
| | Posted on Friday, July 07, 2006 - 8:17 pm: | 
|
anybody have any mods for this radio |
Bc910
Advanced Member
Username: Bc910
Post Number: 737
Registered: 7-2004
| | Posted on Friday, July 07, 2006 - 9:35 pm: |
|
Here are the mods found right here on Coppers forum, Just look to the left
Modulation VR5 or Cut D14
Am Power L15, L12, L11
SSB Power
FM PowerConversion
Notes
POWER MODIFICATION:
#1 ~ Change R87 (2.2 Meg) to a 1 Meg.
#2 ~ Change R49 (47 Ohm) to a 27 Ohm
#3 ~ Change R42 (4.7 Ohm) to a 1 Ohm.
#4 ~ Change R43 (2.2 Ohm) to a .47 Ohm.
#5 ~ Re-tune L15,L12, L11 for Maximum Forward Power.
BC
PS According to Copper, the ZT uses an 858 pll, which should also be modifiable too! Also the newer ones use the 2816 pll which I believe is also moddable |
Kid_vicious
Senior Member
Username: Kid_vicious
Post Number: 1895
Registered: 9-2004
| | Posted on Sunday, July 09, 2006 - 2:00 am: |
|
just make sure you are doing the right mod for whichever Zac. T you have.
if you have the uPD2816 PLL then the part numbers for the uPD858 chassis will NOT work.
BC, which model are these mods for?
matt |
|
