Copper Talk » Ask The Tech » Amplifiers » Amplifier Mod « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Biskybabyusa
New member
Username: Biskybabyusa

Post Number: 2
Registered: 11-2006
Posted on Wednesday, November 22, 2006 - 1:57 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Anybody ever heard of "strapping" an amp for more power ? Running a braided cable soldered at the outside of 2 pills over the top and then soldered again between them for a 25% to 30% power increase ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech237
Moderator
Username: Tech237

Post Number: 627
Registered: 4-2004
Posted on Wednesday, November 22, 2006 - 2:09 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Amp goes boom!

If I understood your question properly you would bew creating an uncontrolled feedback loop that would only cause the amp to a) Go into oscillation, and b) self destruct.

I cannot advise doing it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kid_vicious
Senior Member
Username: Kid_vicious

Post Number: 2300
Registered: 9-2004
Posted on Wednesday, November 22, 2006 - 9:51 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

most linear amps operate with a common emitter, which means that the emitter of the power transistors is grounded.
if you look at a 2SC2290, or a 2SC2879, or pretty much any other commonly used "pill", you will notice that they have two Emitters, one on either side.

when you see a row of pills in an amp, the emitters are the ones that are all soldered to eachother, and also to ground.

the reason a strap is sometimes added is to increase stability in the amp to prevent oscillation.
it is done to make the amp work like it should, it will not increase the power output of a properly working amp.
here is a link to a pic of this:
http://www.amateurlinearamplifiers.com/
productimages/cobra.jpg,
matt
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech237
Moderator
Username: Tech237

Post Number: 631
Registered: 4-2004
Posted on Thursday, November 23, 2006 - 11:15 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks Kid. I wasnt sure if I was understanding his question properly. I read it as he was wanting to strap the oputput back to input.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kid_vicious
Senior Member
Username: Kid_vicious

Post Number: 2306
Registered: 9-2004
Posted on Thursday, November 23, 2006 - 10:22 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

yeah, i think this is one of those rumors that get started by shady techs.
they will sell some guy an amp, and show him the ground strap on the inside, telling him that its a "special mod" to get more output.
he's also probably upcharging for the mod.LOL
then the guy goes home and swears up and down that the amp is hot rodded, because he really believes that it is.

the truth is, as im sure you know, that if the amp is designed and built properly, that the strap isnt needed.
matt

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: