| Author |
Message |
    
Captian_radio
Intermediate Member
Username: Captian_radio
Post Number: 130
Registered: 9-2004
| | Posted on Sunday, December 17, 2006 - 1:29 pm: | 
|
Recently while looking under mic wiring in the Tools section I found that there was no wiring specs for a turner + 3 , not the + 3b to the 139xlr. Well here is what I tried for my Turner +3 to my 139xlr.
Pin 1 N\C
Pin 2 White
Pin 3 Black
Pin 4 Shield and Red
The wiring posted on this site does not work for a Turner +3 to cobra 139 xlr probably because its for a Turner+3b and the newer cobra radios which have electronic switching the older type cobras use relay switching and a 4 pin plug .I hope this will help out anyone who can use this info.
Bob CEF451 |
Rumblefish
Junior Member
Username: Rumblefish
Post Number: 28
Registered: 12-2002
| | Posted on Friday, December 29, 2006 - 12:09 pm: |
|
if you have the 4 wire +3 wiring will be as such
pin 1 shield
pin 2 audio white wire
pin 3 transmit red wire
pin 4 receive black wire
this is an excellent mic for ssb!!! steve |
Captian_radio
Intermediate Member
Username: Captian_radio
Post Number: 140
Registered: 9-2004
| | Posted on Friday, December 29, 2006 - 2:00 pm: |
|
Tnx Rumblefish, I tried the wiring you gave me and it does not work on a 139xlr, I also tried 2 other +3s beside mine and the only way they will work is as I posted.Tnx for the reply and yes it is a great mic for ssb.
Bob CEF451 |
Yankee
Senior Member
Username: Yankee
Post Number: 1403
Registered: 7-2003
| | Posted on Friday, December 29, 2006 - 8:55 pm: |
|
OK guys on the Turner Plus three the transmit wire is black, not the red.
Pin 1-shield
Pin 2- white audio
Pin 3- black transmit
Pin 4- red receive
hope this is of some help
Carl CEF-357 |
