Copper Talk » Ask The Tech » Installations » Proper coax length? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Cbblackbeard
Intermediate Member
Username: Cbblackbeard

Post Number: 190
Registered: 12-2003
Posted on Tuesday, January 09, 2007 - 8:41 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I just moved into a new house and I'm looking for some advice on how to set up my cb sation here. The equipment I will be using will be a General Lee or Texas Ranger 696F and a Solarcon A99 with a tv antenna mast on a tripod on the roof. My biggest question is: What would be the best type of coax to use, and what length?
Top of pagePrevious messageNext messageBottom of page Link to this message

Streaky
Member
Username: Streaky

Post Number: 75
Registered: 3-2006
Posted on Tuesday, January 09, 2007 - 9:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

length of coax is as long as you need.
type of coax is the best you can afford.
From what I have read on this forum length does not matter and really has no effect on tuning.
Just be sure to use a high quality coax (LMR 400)or equivalant and yuo should be fine.
Streaky
CEF #805
CVC #98
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech808
Moderator
Username: Tech808

Post Number: 12695
Registered: 8-2002


Posted on Tuesday, January 09, 2007 - 9:58 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)



CLICK HERE ®Altelicon CA-400 400 Series Cable

H00-02006 Altelicon CA-400 400 Series Cable
$ .59

CA-400 Series Coax Cable
The CA-400 low loss cable is a high performance alternative to RG8/U, CommScope® WBC-400, Times Microwave Systems® LMR-400, Belden® 9914 / 9913 / 7810 and Andrew® CNT-400 coax cable.

Altelicon CA-400 is a UV resistant polyethylene lacketed high performance flexible Low Loss coaxial cable. This coaxial cable has become a "standard" of the outdoor wireless LAN and WLL industries. This lightweight cable has excellent low loss characteristics and a durable UV protected black polyethylene jacket. The Altelicon CA-400 features equal performance and mechanical characteristics to cables from CommScope®, Times Microwave Systems®, Belden and Andrew®.

Construction Specification (Layer - Material - Diameter)

Inner Conductor - Copper/Aluminum - 2.74mm / 0.108in

Dielectric - Physical Foam Polyethylene - 7.24mm / 0.285in

Outer Conductor - Bonded Aluminum Foil + Tinned Copper Braid - 8.13mm / 0.320in

Jacket - Black Polyethylene - 10.29mm / 0.405in

Electrical Characteristics

Capacitance : 77.1pF/m

Impedance : 50ohm

Velocity : 85%

Inner Conductor DC Resistance : 2.92(Ω/km)

Outer Conductor DC Resistance : 5.41(Ω/km)

Shielding Effectiveness : > 90dB

Cutoff Frequency : 16.2 GHz

Peak Power : 16KW

Mechanical and Environmental Characteristics

Min. Bend Radius : 51mm / 2.0in

Operating Temp. : -40°C to +80°C

Tensile Strength : 72.6kg / 160lb

Cable Weight : 0.099kg/m 0.068lb/ft

RoHS Compliant : Yes

Attenuation and Avg. Power (20°C)
(Frequency - Attenuation dB - Avg. Power)

30MHz - (2.2@100m / 0.7@100ft) - 3.30KW

50MHz - (2.9@100m / 0.9@100ft) - 2.60KW

150MHz - (5.0@100m / 1.5@100ft) - 1.50KW

220MHz - (6.10@100m / 1.86@100ft) - 1.20KW

450MHz - (8.9@100m / 2.7@100ft) - 0.83KW

900MHz - (12.8@100m / 3.9@100ft) - 0.58KW

1500MHz - (16.8@100m / 5.13@100ft) - 0.44KW

1800MHz - (18.6@100m / 5.67@100ft) - 0.40KW

2000MHz - (19.6@100m / 6.0@100ft) - 0.37KW

2500MHz - (22.2@100m / 6.8@100ft) - 0.33KW

5800MHz - (35.5@100m / 10.8@100ft) - 0.21KW

QUANTITY DISCOUNTS
500+ .55

Hope this help's,
Lon
Tech808
N9CEF
CEF#808/HAM#33
CVC#002
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce
Senior Member
Username: Bruce

Post Number: 4315
Registered: 9-2003


Posted on Tuesday, January 09, 2007 - 10:01 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

COAX just transports power from the radio to the antenna if your antenna is right the length of the coax dosn't matter.

If you cut the coax for a low reading all your doing is TRICKING the VSWR meter ... since it reads VOLTAGE and voltages goes from max to min every 1/4 wave....
Top of pagePrevious messageNext messageBottom of page Link to this message

Tech237
Moderator
Username: Tech237

Post Number: 685
Registered: 4-2004
Posted on Tuesday, January 09, 2007 - 10:19 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Read the article on coax under Subscribers/Articles.

To show and accurate reading on the SWR meter in the shack the coax should be a multiple of an electrical half wave or a multiple of 3.64m. Any other length will work but there is no assurance that the indicated SWR will be correct

Simon
Tech237
KD7IEB

Top of pagePrevious messageNext messageBottom of page Link to this message

Cbblackbeard
Intermediate Member
Username: Cbblackbeard

Post Number: 191
Registered: 12-2003


Posted on Wednesday, January 10, 2007 - 6:54 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Thanks for the info. Now I'll have to get my wife to buy me some coax for my birthday.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: