Author |
Message |
Perrym1962
Junior Member Username: Perrym1962
Post Number: 29 Registered: 11-2002
| Posted on Monday, January 15, 2007 - 4:53 pm: |
|
I have a friend that has a stock connex mic without an end. Just wondering what color wires go where? It doesn't have the standard colors normally utilized. I think he said it even had a couple of wires with transparent coating. Possum in Ky.... |
Perrym1962
Junior Member Username: Perrym1962
Post Number: 30 Registered: 11-2002
| Posted on Monday, January 15, 2007 - 10:14 pm: |
|
Typo..Connex 3300... |
Tech808
Moderator Username: Tech808
Post Number: 12730 Registered: 8-2002
| Posted on Monday, January 15, 2007 - 10:20 pm: |
|
Perrym1962, Sorry I do not have the Stock Colors but the pinout is below. If he has a Volt/Ohm Meter he can figure it out. PIN #1 ~ Shield PIN #2 ~ Audio PIN #3 ~ Transmit PIN #4 ~ Receive Electronic Switching Hope this help's, Lon Tech808 N9CEF CEF#808/HAM#33 CVC#002
|