Author |
Message |
Radiodude
Advanced Member Username: Radiodude
Post Number: 523 Registered: 1-2002
| Posted on Wednesday, January 17, 2007 - 5:23 pm: |
|
Can anyone give me the code? the wires on the mic are shield, white, red, yellow, blue. Thanks Ernie |
Tech808
Moderator Username: Tech808
Post Number: 12762 Registered: 8-2002
| Posted on Thursday, January 18, 2007 - 9:03 am: |
|
Radiodude, RANGER 2995DX: PIN #1 ~ Shield PIN #2 ~ Audio PIN #3 ~ Transmit PIN #4 ~ Receive PIN #5 ~ CH UP PIN #6 ~ CH DN SUPERSDTAR DM-452 5 Pin Mic Wiring: 5 Pin Mic Plug Model Pin #1 Audio Output / White Pin #2 Shield Pin #3 Receive / Black Pin #4 Common / Yellow Pin #5 Transmit / Red Your color of wires are different or have changed from the SUPERSTAR DM-452 5 pin mic so you must have a different brand, but the pin out should be the same since you will only be using 4 wires. You can also use a VOLT/OHM meter to get it wired correctly. Lon Tech808 CEF#808/HAM#33 CVC#002 N9CEF
|
Ranger87black
Junior Member Username: Ranger87black
Post Number: 24 Registered: 12-2005
| Posted on Tuesday, January 30, 2007 - 4:16 pm: |
|
Radiodude, I've got the same problem over here, if you figured it out can you let me know. |
Ranger87black
Junior Member Username: Ranger87black
Post Number: 28 Registered: 12-2005
| Posted on Wednesday, January 31, 2007 - 9:20 am: |
|
Radiodude, I was able to wire my Superstar DM-425 to my RCI 2950. Pin#1 Shield and Yellow Pin#2 White Pin#3 Red Pin#4 Blue Hope this helps out. |
|