Author |
Message |
Biskybabyusa
Junior Member Username: Biskybabyusa
Post Number: 24 Registered: 11-2006
| Posted on Monday, January 29, 2007 - 12:32 pm: |
|
Just got a 4 wire Older D-104 mic. I want to wire it to my Realistic TRC-433 5 pin din.Got the mic wiring for Astatic from the chart at left Pin4=White Pin1=Shield & Blue Pin2=N/C Pin5=Black Pin3=Red The mic has no blue, just the basic shield, white, red, and black..Any thoughts on this ? Thanks. |
Tech808
Moderator Username: Tech808
Post Number: 12892 Registered: 8-2002
| Posted on Monday, January 29, 2007 - 2:46 pm: |
|
You probably have the D104 TUG8 Stand which is: PIN #1 ~ SHIELD PIN #2 ~ N/C PIN #3 ~ RED PIN #4 ~ WHITE PIN #5 ~ BLACK Lon Tech808 CEF#808/HAM#33 CVC#002 N9CEF
|
Biskybabyusa
Junior Member Username: Biskybabyusa
Post Number: 25 Registered: 11-2006
| Posted on Monday, January 29, 2007 - 3:14 pm: |
|
Lon, thanks. It just says "G Stand on the grey base plate with a white plastic mic gain pot. The neck and head are chrome. I will try that wiring.Interestingly, it has a SPST switch on the base so not sure if anything was added later to this mic. Thanks, again. |
|