Author |
Message |
Dale
Advanced Member Username: Dale
Post Number: 651 Registered: 12-2002
| Posted on Saturday, March 03, 2007 - 11:39 pm: |
|
i noticed in older post below the magnum 6pin on the 257 is slightly different than that of the rci line.so first question is this i got a 4to6pin mic adapater i use on a rci will this work on a 257.and the second question is is the deltaforce and omegaforce 6pin wire the same as a 257.the mic would be a asatic575 |
Tech808
Moderator Username: Tech808
Post Number: 13160 Registered: 8-2002
| Posted on Sunday, March 04, 2007 - 5:26 pm: |
|
Dale, As Milkman21218 stated the Microphone wiring is different. The mic wiring on the Magnum 257 is the STANDARD mic wiring for ALL 6 pin Magnum Radios. The MAGNUM 6 pin mic wiring is: Pin #1 ~ Microphone Audio / White Pin #2 ~ Receive Pin #3 ~ Transmit Pin #4 ~ Down(Up w/22K Ohm Resistor) Pin #5 ~ Ground Pin #6 ~ +13.8VDC The RCI/Ranger 6 pin Mic Wiring is: Pin #1 ~ Audio Shield Pin #2 ~ Audio Lead Pin #3 ~ Transmit Control Pin #4 ~ Receive Control Pin #5 ~ Up Control Pin #6 ~ Down Control Hope this help's, Lon ~ Tech808 ~ N9CEF CEF#808 ~ CEF HAM#33 ~ CVC#002 10-10 #61493 ~ 10-10 VP#2688 Tech808@copperelectronics.com
|
Dale
Advanced Member Username: Dale
Post Number: 654 Registered: 12-2002
| Posted on Sunday, March 04, 2007 - 5:41 pm: |
|
thank you gus that does help got to wondering i read a older post a few down from mine about hooking up a d104 to a 257.then i remembered i bought the adapaters from coppers but on 6pin wont work |
Tech808
Moderator Username: Tech808
Post Number: 13165 Registered: 8-2002
| Posted on Monday, March 05, 2007 - 7:21 am: |
|
Dale, you need the MAGNUM Microphone Adapter which is different than the 4 pin to 6 pin RCI/Ranger adapter. M60-07430 Microphone Connector #C4PDFC Converts Cobra 4 pin Cobra to a 6 pin Magnum. CLICK HERE > Converts Cobra 4 pin Cobra to a 6 pin Magnum Hope this help's, Lon ~ Tech808 ~ N9CEF CEF#808 ~ CEF HAM#33 ~ CVC#002 10-10 #61493 ~ 10-10 VP#2688 Tech808@copperelectronics.com
|