| Author |
Message |
    
Penrider
Junior Member
Username: Penrider
Post Number: 48
Registered: 1-2007
| | Posted on Saturday, March 10, 2007 - 11:26 pm: | 
|
lol, need to learn to post with topics that are real close to mine or use new thread....I still can't find TP8 and TP9 on the board(the points where you connect the ammeter to properly adjust the driver bias)..memorized the pcb layout picture and studied the radio itelf, those are the only ones I can't find...also, it says adjust to between 50mA and 70mA...where in between that is best setting?
Sean
CEF867
CVC81
|
Hootyal
Intermediate Member
Username: Hootyal
Post Number: 183
Registered: 9-2002
| | Posted on Sunday, March 11, 2007 - 9:31 am: |
|
I think they are what holds up the mirror board. The mirror board is the small verticle standing board in front of the finals. Pull straight up and I think you will see the tp locations labled. Hooty |
Penrider
Junior Member
Username: Penrider
Post Number: 49
Registered: 1-2007
| | Posted on Sunday, March 11, 2007 - 1:57 pm: |
|
thanks, I'll look
Sean
CEF867
CVC81
|
