Copper Talk » Ask The Tech » Radio's Mobile » Delta force needs sme tlc « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dale
Advanced Member
Username: Dale

Post Number: 811
Registered: 12-2002
Posted on Sunday, April 29, 2007 - 4:24 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

gotta chance for this radio ive heard on the air.problem is on ssb its way off frequency
like instead of 273850 its around .3846.this
was confirmed by two guys running hf rigs
a ts940 and a icom706.one guy said .3845 and the other said .3846 so i wanna get it on freq. cause ya sound like a girl when txing its so bad.
does the tx adjustment vr fix this.i also noticed 3 pots that were am,lsb,usb?????????
dale/a.k.a.hotrod
cef426
cvc#64
Top of pagePrevious messageNext messageBottom of page Link to this message

Kid_vicious
Senior Member
Username: Kid_vicious

Post Number: 2514
Registered: 9-2004


Posted on Sunday, April 29, 2007 - 11:16 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

here is an alignment proc. i found online.
i have not tried it myself, but the source is reliable.


5. Put the lead of frequency counter on C314 (right of 150 Pf) and then adjust below.
a) Adjust L126 so as frequency to be 10.6925MHz in LSB mode, RX.
b) Adjust L127 so as frequency to be 10.6975MHz in USB mode, RX.
c) Adjust L124 so as frequency to be 10.695MHz in AM mode TX and then check if frequency is 10.6975MHz at USB and 10.6925MHz in LSB

that should put you right on freq.
later,
matt
anyone wanting a "clean signal", just look to the left and build one of these!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

Dale
Advanced Member
Username: Dale

Post Number: 820
Registered: 12-2002
Posted on Monday, April 30, 2007 - 7:57 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

ok thanks kv
dale/a.k.a.hotrod
cef426
cvc#64

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: