Author |
Message |
Albinowino
New member Username: Albinowino
Post Number: 3 Registered: 5-2004
| Posted on Saturday, May 05, 2007 - 2:50 pm: |
|
I wired the d-104 per mic wiring in forum, when plugged into radio it keys up but very low receive. Can you please advise. Thank you |
Tech808
Moderator Username: Tech808
Post Number: 13633 Registered: 8-2002
| Posted on Saturday, May 05, 2007 - 3:27 pm: |
|
Albinwino, What Model of D-104? Different Models of the D-104 require different wiring. Lon ~ Tech808 ~ N9CEF CEF#808 ~ CEF HAM#33 ~ CVC#002 Tech808@copperelectronics.com
|
Albinowino
New member Username: Albinowino
Post Number: 4 Registered: 5-2004
| Posted on Saturday, May 05, 2007 - 3:45 pm: |
|
The head says silver eagle but the base does not,When I pulled off the bottom cover it is stamped 2-77 ( year built ? )the board is marked PC100 REV 1. I hope this helps. Thanks |
Tech808
Moderator Username: Tech808
Post Number: 13636 Registered: 8-2002
| Posted on Saturday, May 05, 2007 - 4:05 pm: |
|
Depending on what Model Cobra148 you have and what D-104 & D-104 Stand you have it can be any of the below: 148 GTL-B / 148 GTL-DX PIN #1 ~ SHIELD & BLUE PIN #2 ~ WHITE PIN #3 ~ RED PIN #4 ~ BLACK YELLOW N/C or 148GTL/148F-GTL w/ TUG8 Stand PIN #1 ~ SHIELD PIN #2 ~ WHITE PIN #3 ~ RED PIN #4 ~ BLACK Electronic Switching or 148GTL / 148F-GTL PIN #1 ~ WHITE PIN #2 ~ SHIELD PIN #3 ~ BLACK PIN #4 ~ BLUE PIN #5 ~ RED YELLOW N/C or 148GTL/148F-GTL with TUG8 Stand PIN #1 ~ WHITE PIN #2 ~ N/C PIN #3 ~ BLACK PIN #4 ~ SHIELD PIN #5 ~ RED Hope this help's, Lon ~ Tech808 ~ N9CEF CEF#808 ~ CEF HAM#33 ~ CVC#002 Tech808@copperelectronics.com
|