| Author |
Message |
    
Guardian
Junior Member
Username: Guardian
Post Number: 35
Registered: 5-2004
| | Posted on Tuesday, May 15, 2007 - 11:38 am: | 
|
Hello i am looking for the wiring for a diesel 4-2 handheld mic i want to use it on a hr 2510 and can not seem to find the right wiring for the mic so any help would be great thanks Guardian |
Br549jr
New member
Username: Br549jr
Post Number: 1
Registered: 10-2019
| | Posted on Saturday, January 01, 2022 - 10:35 am: |
|
I HAVE DIESEL 4-32 NEW MICROPHONE EVERY ONE SAYS THAT IT SOUNDS MUFFULD ANY KNOW HOW TO FIX IT |
Ke0koy
Junior Member
Username: Ke0koy
Post Number: 48
Registered: 12-2018
| | Posted on Saturday, January 01, 2022 - 11:31 am: |
|
Here is are pinouts for the radio,
https://rogerbird.tripod.com/accmic.htm
but I cannot find the wiring for that mic. Can you pop open the back cover and take a picture of the wiring inside the 4-2? |
Ke0koy
Junior Member
Username: Ke0koy
Post Number: 49
Registered: 12-2018
| | Posted on Saturday, January 01, 2022 - 11:37 am: |
|
Or, if you can identify the mic shield, audio wire, and TX switch wire, connect the shield to pin 2, the audio wire (usually a white or yellow one that is wrapped inside the shield) to pin 1, and whatever wire conducts to the shield when the PTT is pressed to pin 3. |
