| Author |
Message |
    
Penrider
Intermediate Member
Username: Penrider
Post Number: 120
Registered: 1-2007
| | Posted on Friday, May 18, 2007 - 8:10 pm: | 
|
I just got a NIB galaxy echo board at a yardsale along with a couple of radios...no instructions....on the board itself there are two 3-pin connections that are marked "Mic I/P..Grnd..PTT I/P on one connector, and PTT O/P..Grnd..Mic O/P on the other"...I take these to mean Input/Output..I assume the Mic=Audio, and the PTT=TX...am I correct??...Where/How do these connect to the radio itself??...also, where do the power wires connect??...I have heard of connecting them to the power jack for the radio, and I have also heard that's the wrong voltage and wrong location...which is correct??...I want to try it out on one of my cheaper mobiles I have laying around to make sure it works good before I install it into my Washington base...
Sean
CEF867
CVC81
"Keep smiling, it makes people wonder what you're up to!!"
|
Rmyers2051
New member
Username: Rmyers2051
Post Number: 2
Registered: 8-2002
| | Posted on Saturday, May 19, 2007 - 11:15 am: |
|
pm me and I'll scan a copy of instructions and email them to you |
Penrider
Intermediate Member
Username: Penrider
Post Number: 121
Registered: 1-2007
| | Posted on Tuesday, May 22, 2007 - 7:20 pm: |
|
sorry it took so long to get back...thanks
Sean
CEF867
CVC81
"Keep smiling, it makes people wonder what you're up to!!"
|
Grts
Junior Member
Username: Grts
Post Number: 23
Registered: 12-2002
| | Posted on Wednesday, May 23, 2007 - 11:05 am: |
|
Look on the echo board for the EPT0SSBxxx number and then you should be able to match it with the information found on the web |
Penrider
Intermediate Member
Username: Penrider
Post Number: 123
Registered: 1-2007
| | Posted on Wednesday, May 23, 2007 - 7:56 pm: |
|
thanks, Grts
Sean
CEF867
CVC81
"Keep smiling, it makes people wonder what you're up to!!"
|
