| Author |
Message |
    
Nitemare
Junior Member
Username: Nitemare
Post Number: 34
Registered: 8-2003
| | Posted on Friday, June 01, 2007 - 7:16 pm: | 
|
i want the regular CB channels in my Cobra 200 GTL DX....How do i do it |
Tech808
Moderator
Username: Tech808
Post Number: 13804
Registered: 8-2002
| | Posted on Friday, June 01, 2007 - 7:21 pm: |
|
Nitemare,
1~ Remove power from the radio.
2~ Remove the covers and locate the TMP87PP21DF Microprocessor near the front right of the unit.
3~ Locate and Remove the surface mount Resistor R138 to the left side of the Microprocessor.
4~ Remove Power from the radio by disconnecting the Power leads for 15 seconds to reset the Microprocessor.
Lon ~ Tech808 ~ N9CEF
CEF#808 ~ CEF HAM#33 ~ CVC#002
Tech808@copperelectronics.com
|
Nitemare
Junior Member
Username: Nitemare
Post Number: 35
Registered: 8-2003
| | Posted on Friday, June 01, 2007 - 7:59 pm: |
|
That was the R138 they were speaking of ...thank u very much for ur help |
Nitemare
Junior Member
Username: Nitemare
Post Number: 37
Registered: 8-2003
| | Posted on Sunday, June 03, 2007 - 5:10 pm: |
|
oh boy fun, fun, fun with trying to see the numbers on the surface units...ha i can wear magifying glasses to drive with now....need at least a 10X to see the numbers...any smaller next is electron microscope...but did it and works great |
