| Author |
Message |
    
Johhn
Junior Member
Username: Johhn
Post Number: 32
Registered: 8-2007
| | Posted on Saturday, September 01, 2007 - 6:22 pm: | 
|
I wrote on a RM KL 60amp The silver metal back-
of the transistor is poitive+ 12.00volts &the
Heat sink is Negative- curant. The clear plastic
between the trans.& Heat sink Melted,add one more for inslation(2)Total with heat grease .johhn 938 |
Johhn
Intermediate Member
Username: Johhn
Post Number: 102
Registered: 8-2007
| | Posted on Saturday, November 24, 2007 - 1:26 pm: |
|
After my Second Final Transistor...Mos Rm3..
Attach piece of metal,2-inchs long too back of the transistor hole,To dissapate the heat build up.Metal 2-inchs long-1/2,wide,nut&screw.small
The radio is still set for 1 1/2 watts A.M.
I used strapping with pre drilled holes in it.
Put plastic on both sides of the metal,with tape. |
Johhn
Intermediate Member
Username: Johhn
Post Number: 103
Registered: 8-2007
| | Posted on Saturday, November 24, 2007 - 1:30 pm: |
|
The Plastic will inslate the 12.0volts positive
and the heat sink negative.from each other. johhn |
|
