Author |
Message |
Derek460
New member Username: Derek460
Post Number: 1 Registered: 11-2007
| Posted on Saturday, November 24, 2007 - 11:34 am: |
|
I tried the prediver mod to my cobra 2000 last night and after i did it it would not key any watts at all. I cut jp 35 in the middle and put wire on the left side and ran to jp1 which showed 13.8 on my volt meter. is there something you should do more , like something with the right side of jumper 35 . also i could not find d55 on my base is d55 only on cobra 148's. i had to solder jp35 back together till i figure out whats wrong. the radio has been peaked and tuned, has npc/rc done and a dial a what on the tone knob. thanks for any help on this |
Derek460
New member Username: Derek460
Post Number: 2 Registered: 11-2007
| Posted on Sunday, December 02, 2007 - 6:54 pm: |
|
does any body have any info on this subject the predriver mod |
Tech808
Moderator Username: Tech808
Post Number: 14779 Registered: 8-2002
| Posted on Sunday, December 02, 2007 - 7:42 pm: |
|
Go to www.google.com and in the Search box type in: Cobra 2000 Predriver Modification Lon~Tech808 CEF#808~HAM#001 CVC#002 Tech808@copperelectronics.com
|