| Author |
Message |
    
Shredder
Junior Member
Username: Shredder
Post Number: 14
Registered: 10-2008
| | Posted on Sunday, November 30, 2008 - 12:24 pm: | 
|
anyone have modg. and power mods for midland 1001z cant find anywhere need to turn power down and modg up...thanks SHREDDER |
Hotwire
Senior Member
Username: Hotwire
Post Number: 2685
Registered: 1-2005
| | Posted on Sunday, November 30, 2008 - 3:43 pm: |
|
You have this in the amplifier section but I will assume your talking about a radio. This info is from Lon's radio modification list. I think it is the right radio, says export model. Modulation - RV201 or clip D203
Am Power - L304, L305, L306
Kenny
CEF491
Reading the mail around Indianapolis Indiana!
|
Shredder
Junior Member
Username: Shredder
Post Number: 16
Registered: 10-2008
| | Posted on Sunday, November 30, 2008 - 6:41 pm: |
|
yeah i dont know....thought i put it in radio sec. oops, wondering why i couldnt find it. i dont know about export model just a $40.00 wally world special..1001z thanks.. shredder |
Snake_man
New member
Username: Snake_man
Post Number: 2
Registered: 7-2012
| | Posted on Monday, August 27, 2012 - 9:10 pm: |
|
R999 replace 10 ohm with 220 ohm for around 1 watt dead key for linear use . Turn Rv 2 counter clock wise for swing modulation watts replace the mic with rf limited power mike for a little clearer Tx audio with this radio and amp you will sound great just don't over modulate get some one on the other end of the radio help with audio level . Have fun !! |
Snake_man
New member
Username: Snake_man
Post Number: 3
Registered: 7-2012
| | Posted on Wednesday, September 12, 2012 - 5:53 pm: |
|
Just did the same mod on the 1001LWX Lower dead key to 1watt replace R5 resistor which is a 10 ohm with a 220 ohm Turn RV2 counter clockwise for modulation swing watts. Get you friend to help you with over modulation but I went full counter clockwise and seemed ok. Have fun Snake man |
