Copper Talk » Modifications » Amplifiers » Forward swing into TX-350 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Birddog_15
New member
Username: Birddog_15

Post Number: 1
Registered: 6-2014
Posted on Wednesday, June 18, 2014 - 11:26 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Hi first time to post anything, Ned input I have a PC66 dead key is 11/2 swinging to 12-14 on dosey 1000. I put that into a TX-350 max is around 230 watts. My question is can I take a KL 60 and run it into 350. Have seen where the KL60 will do about 30-35 watts max. Is this too much forward for the 350 to take?
Top of pagePrevious messageNext messageBottom of page Link to this message

Press_man
Advanced Member
Username: Press_man

Post Number: 777
Registered: 5-2008
Posted on Friday, June 20, 2014 - 9:51 am:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

I had a TX-350 and a Cobra 25 driving it. The 350 only needs low input to drive it and can be overdriven and blown quickly. I had the Cobra set at 2.5w and the 350 ran at about 70% or 240w on forward swing. Keep your KL60 for a different setup.
73 Pressman

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: