Author |
Message |
Sofkow
| Posted on Wednesday, February 27, 2002 - 6:25 pm: |
|
Can someone take me through the steps of adding a freq counter to my PRESIDENT Madison. Also any info on unlocking the clarifier. Any other tips are welcome. Thanks. |
307
| Posted on Saturday, March 02, 2002 - 8:18 am: |
|
Adding a counter to a madison is not all that easy. As for the Clarifier it is very similar to the Cobra 2000. Here is the mod... 1)Cut d-52 and r-148.Find r-174 and solder a wire across the resistor. 2)Find the RED wire that comes off the clarifier control and cut it just before it connects to the PCB. Take that wire and solder it to GROUND on the PCB. 3)Cut the orange wire just like the red wire but solder this wire to pin # 3 if IC-4 the MB3756 ic regulator. 307 This should give you about 5 khz is slide on this radio. |
Sofkow
| Posted on Saturday, March 02, 2002 - 2:09 pm: |
|
Thanks much 307. |
Teham
Member Username: Teham
Post Number: 83 Registered: 1-2004
| Posted on Sunday, February 06, 2011 - 10:06 pm: |
|
is easy to add freq counter. buy a galaxy II model fc 250. will only work on xmit but will do amm and ssb. tony/cef 25 |