Author |
Message |
Slicker
| Posted on Friday, June 14, 2002 - 3:47 pm: |
|
anyone have any info on the peak and tune on the markIII other that adjusting the plate also would like to adjust modulation and receiver sensitivity |
Weakeststation
| Posted on Friday, January 03, 2003 - 1:45 pm: |
|
All i have is remove r38 for am remove r69 for ssb.. im am truly sorry that this is all that i have... i wish i could help you more... |
Browningboy
| Posted on Friday, July 04, 2003 - 10:01 am: |
|
you can't remove them there tunning pots,drop us an email and we'll send you the sams info on retunning the rig John Browning Boy in R.I. |
Browningboy
| Posted on Saturday, July 05, 2003 - 2:01 pm: |
|
From sams book the Modulation pot for am is R38 the ssb Alc is pot R69 and should be ajusted for no more than 10 watts max,now for the RF power well you'll have to tune 3 slugs very carefully first adjust T1 for max then adjust T2 for max peak with the slug at the bottom of the coil now adjust T6 for max peak with the slug at the top of the coil now check the plate and the bias and readjust as needed should be alset now and for the receive lets see to adjust the s meter it's R27 with no antenna to retune the whole receiver will take a bit and if you need it drop me a line BrowningBoy in R.I. Bt634 John |
|