| Author |
Message |
    
Orion
| | Posted on Friday, May 16, 2003 - 12:57 am: | 
|
I understand that there is a "viagra Board modification that would give a DX959 a nice, neat 40 above and 40 below the regular 40 channels with a simple flick of the switch. I hate the way the regular mod gives channels it a very disorganized manner and this sounds much better. What do you techs say to this? Do-able? costly? Thanks in advance.... |
Tech671
| | Posted on Friday, May 16, 2003 - 5:32 am: |
|
The board is about $30 and they do work fine. |
Weakeststation
| | Posted on Friday, May 16, 2003 - 11:43 am: |
|
Well you can put channels in with out the viagra board...
Or put channels in with the viargra board...
If the radio can take channels without the viagra board, i won't buy one to put in it... |
Orion
| | Posted on Friday, May 16, 2003 - 12:09 pm: |
|
Thanks for the response tech671. As you can tell I've been doing a lot or research on this and that. The day to buy is drawing near and your attention will certainly be rewarded  |
Slim1
| | Posted on Saturday, May 17, 2003 - 11:42 pm: |
|
orion,i tried the viagra board in my dx2547
(same board) and i could NOT get the frequency
back to center slot.i tried the cans on the main
board and also the adjustment on the frequency board w/no avail  unfortunately,i went back w/a
slide switch configuration mounted underside of
the radio.BUT,i'm like you,i don't like the hit&
miss channels w/this mod! if i ever get the time,
i'm gonna try the viagra board again,and maybe i
can win this time around! good luck,let us know
how she comes out in the end... SLIM |
Orion
| | Posted on Tuesday, May 27, 2003 - 3:27 am: |
|
Thanks Slim, the more I read about all the nonsense it takes to make an 11 meter into a 10, the more I think I should go from a 10 and make it cover 11. No worrying about 10khz mods, and slider mods and soldering, jumping from pin to pin.. Geez, what was I thinking |
|
