| Author |
Message |
    
Thunderbolt
| | Posted on Saturday, September 08, 2001 - 2:34 pm: | 
|
Was wondering if it is true that you cant get the channel conversion to work properly with the RCI8719 chip.I have been trying all the configurations that I have read with little sucsess.I get some channels but they jump around too much to be worth figuring out. I read that you have to change the chip to a MB8719 and clip a resister nearby.I can get more power by adding a bigger final but without the extra freqs it is not worth it.Can anyone help. |
Road Runner
| | Posted on Saturday, November 24, 2001 - 3:36 pm: |
|
I Have the 696f and you can do the channel conversion,I used the Tone..Dim/bright buttons for this and It works great.You dont need to change the chips either.
Good Luck and 73's
531 North Central Ct RoadRunner |
Weakeststation
| | Posted on Wednesday, February 12, 2003 - 4:55 pm: |
|
Yup same as the 696f mobile and base, i posted it yesterday i think it was.. |
|
