| Author |
Message |
    
Insomniac1217
New member
Username: Insomniac1217
Post Number: 2
Registered: 4-2004
| | Posted on Wednesday, May 19, 2004 - 7:35 pm: | 
|
i have a president jfk.the variable key in it doesnt rop very far.what mods can be done to get it to key around one watt with good swing ??? |
Tech808
Moderator
Username: Tech808
Post Number: 2423
Registered: 8-2002
| | Posted on Wednesday, May 19, 2004 - 7:50 pm: |
|
Insomniac1217,
Go to the link below:
http://members.tripod.com/~Malzev/cb-radio/jfk.htm
You will find the Channel Modification and Alignment information & Picture's there.
Hope this Help's.
Do you Know about the CEF Net's we hold every Sunday?
Check out the Announcement area or find DO YOU KNOW ABOUT THE CEF NET's in the OPEN area of the Forum.
Lon
Tech808 |
Insomniac1217
New member
Username: Insomniac1217
Post Number: 3
Registered: 4-2004
| | Posted on Thursday, May 20, 2004 - 9:32 pm: |
|
tech808
thanks for the info,i already have tried that place(great site 'cept for the bad popup).i still cant get the radio to deadkey any lower than 3 watts.and plus,when the variable is turned down that low,i lose all swing.it does about 3 swinging 5.5 to 6 on a dosy with the variable all the way down.with the variable all the way up,it deadkeys about 6 and swing 15 watts.anybody know how to get it to key less and still swing?i've never had a jfk before and hope it can do better than it is doing.
thanx again
Mike
Insomniac1217 |
Cbat
New member
Username: Cbat
Post Number: 4
Registered: 3-2004
| | Posted on Tuesday, September 21, 2004 - 9:51 pm: |
|
Hello Mike, I too have a JFK. In fact I own two, one old pcb the other new pcb. Great radios but have the same problem,need more swing. If you come up with a solution please share it with me. I plan to try some ideas on my next days off. If they work will let you know. Regards, Charlie |
Tech548
Moderator
Username: Tech548
Post Number: 301
Registered: 5-2004
| | Posted on Wednesday, September 22, 2004 - 10:33 pm: |
|
Cbat
I don't recall but can you please tell me what the PCB numbers are on your two versions of your JFK's.
Thank you.
Jeff
Tech548 |
Cbat
New member
Username: Cbat
Post Number: 5
Registered: 3-2004
| | Posted on Saturday, September 25, 2004 - 1:35 am: |
|
Jeff, will be 9-29-04 before I'll get back to the shop. Will let you know then. Regards,Charlie |
