Author |
Message |
Slick_nickel
New member Username: Slick_nickel
Post Number: 1 Registered: 5-2005
| Posted on Friday, May 20, 2005 - 2:30 pm: |
|
i want to change my channel light and meter light to blue. Everything else in my Kenworth is blue, so these may as well be blue also. Normal 12-volt hookup. Any replies would be greatly appreciated |
Therealporkchop
Intermediate Member Username: Therealporkchop
Post Number: 201 Registered: 11-2002
| Posted on Saturday, June 04, 2005 - 1:14 am: |
|
You can probably get the channel LED's from Copper, not sure. You can get blue LED's anywhere just about. Changing out the channel LED is nothing, but you need to make sure you get a resistor to drop voltage for your meter LED or it'll only last a few minutes. Possible that it will burn real bright and then pop like a pimple...had that happen. |
Navyrebel782003
New member Username: Navyrebel782003
Post Number: 5 Registered: 12-2004
| Posted on Wednesday, June 08, 2005 - 9:35 am: |
|
you can get blue LED's from autozone, 3 in a package for under $10 that resistors for 12 volt dc use, and they are really bright even with the resistor on them, I have had them in my car for over a year now and no problems with them.hope this helps. |
Therealporkchop
Intermediate Member Username: Therealporkchop
Post Number: 228 Registered: 11-2002
| Posted on Monday, July 04, 2005 - 5:27 pm: |
|
True that, but you can't buy Channel Segments from Autozone. I would like to know if Copper sells these or do I need to look elsewhere?? HELP 808!!!!!! |