| Author |
Message |
    
Badboyboris
New member
Username: Badboyboris
Post Number: 7
Registered: 12-2004
| | Posted on Tuesday, May 24, 2005 - 10:47 am: | 
|
Hello, Could someone please tell me how to lower the dead key on my Uniden Pro 510XL. In stock form the dead key is a little too high for my Palomar 300. Thanks guys................ |
Tech808
Moderator
Username: Tech808
Post Number: 5841
Registered: 8-2002
| | Posted on Tuesday, May 24, 2005 - 11:01 am: |
|
Badboyboris,
Sure very easy, just look to the left of the Forum here and you will see:
Tools
Mic. Wiring
Frequency Chart
CB & Ham Lingo
Modification List
Just CLICK on Modification List and I have the information you need listed there.
Lon
Tech808
CEF808
N9OSN
|
Badboyboris
New member
Username: Badboyboris
Post Number: 8
Registered: 12-2004
| | Posted on Tuesday, May 24, 2005 - 11:09 am: |
|
Tech808,
So I need to put the radio on a meter and adjust VR2. Is this correct? Thank you for your time.... |
Carls86fiero
Junior Member
Username: Carls86fiero
Post Number: 36
Registered: 3-2005
| | Posted on Tuesday, May 24, 2005 - 11:53 am: |
|
Are you sure Lon, i did not see anything on how to lower dead key.. |
Bruce
Senior Member
Username: Bruce
Post Number: 2681
Registered: 9-2003
| | Posted on Tuesday, May 24, 2005 - 1:42 pm: |
|
You can tinker with internal parts.....
http://www.radiomods.co.nz/pro500d510xl520xl.html |
Tech808
Moderator
Username: Tech808
Post Number: 5844
Registered: 8-2002
| | Posted on Tuesday, May 24, 2005 - 2:29 pm: |
|
Badboyboris & Carls86fiero,
In the box that says MAKE scroll down until you see Uniden and then in the box that says MODEL scroll down until you see: PRO-510XL
Then you will see:
Am Power Adjust L6, L5
(These are what you will adjust for your dead key power.)
VR2 Controls your TX Meter
(Adjustment for your Transmit Meter)
Hope this helps,
Lon
Tech808
CEF808
N9OSN
|
Badboyboris
New member
Username: Badboyboris
Post Number: 9
Registered: 12-2004
| | Posted on Wednesday, May 25, 2005 - 9:45 am: |
|
Bruce and Lon, Thank you for your help......... |
