| Author |
Message |
    
Therealporkchop
Intermediate Member
Username: Therealporkchop
Post Number: 250
Registered: 11-2002
| | Posted on Tuesday, July 12, 2005 - 8:06 pm: | 
|
I recently went and bought a new S9. While at this guys shop, we were talking about power mods and what have you. He mentioned replacing the stock final in a radio (we were talking about Galaxy radios) with what he called the 60 watt conversion. A MRF477 and a few other parts he said was all that was needed. He had a Galaxy 55 that he'd done this to. It responded very well and had good forward swing even from 40+ watts dead key.
I ask what he charged to do such a modification and he said 75 bucks. Now I don't mind paying that, but I'd rather do it myself.
Does anyone here have a parts list and a run down on how to do this?
I hope Pat doesn't whip me for letting that G word come out of my mouth again... |
Therealporkchop
Intermediate Member
Username: Therealporkchop
Post Number: 252
Registered: 11-2002
| | Posted on Thursday, July 14, 2005 - 6:01 pm: |
|
Come on, somebody here has them for sure?
|
Twowatt
Junior Member
Username: Twowatt
Post Number: 26
Registered: 7-2005
| | Posted on Thursday, July 14, 2005 - 11:27 pm: |
|
porkchop,
you probably need to get an old blue {the new one does not have them as they are discontinued, and the brown one is probably too old} motorola rf databook and look for the dut (device under test) schematic and go from there.
or, u might try using the mosquito schematic and hefting up a couple of parts. regards |
Patzerozero
Senior Member
Username: Patzerozero
Post Number: 1044
Registered: 7-2004
| | Posted on Saturday, July 16, 2005 - 8:07 pm: |
|
|
Therealporkchop
Intermediate Member
Username: Therealporkchop
Post Number: 253
Registered: 11-2002
| | Posted on Thursday, July 21, 2005 - 7:29 pm: |
|
What you grinnin' at Pat?? Cheesey!!
|
