Author |
Message |
Goat373
Member Username: Goat373
Post Number: 54 Registered: 3-2005
| Posted on Sunday, October 09, 2005 - 11:31 pm: |
|
sup, i need the modification mod for this radio, its the new one with the EPT695014z board. any help apriciated |
Patzerozero
Senior Member Username: Patzerozero
Post Number: 2958 Registered: 7-2004
| Posted on Saturday, June 10, 2006 - 8:39 pm: |
|
E*module is required to mod the DX versions....good luck getting one |
Goat373
Intermediate Member Username: Goat373
Post Number: 233 Registered: 3-2005
| Posted on Saturday, June 10, 2006 - 8:50 pm: |
|
i know right...i have a chance to get one on the cheap...but no module...or pigtail in radio...one of the solder in jobs...but its really really CHEAP...lol...50 bucks, guy is selling cuz he cant convert, radio works fine, still in box acctually, tested it today, on a dummy load of course! |
Goat373
Intermediate Member Username: Goat373
Post Number: 234 Registered: 3-2005
| Posted on Saturday, June 10, 2006 - 9:02 pm: |
|
you think copper would send me just the module??sure they have some. |
Goat373
Intermediate Member Username: Goat373
Post Number: 235 Registered: 3-2005
| Posted on Saturday, June 10, 2006 - 9:27 pm: |
|
thnx for the quick answer lon. though i dont understand why they wouldn't. 30 bucks is 30 bucks, ither with or without a radio purchase, oh well, at least i tried to get it from copper, guess ill look elseware. even without the module, ya'll think i should pick up the radio? |
Tech808
Moderator Username: Tech808
Post Number: 10249 Registered: 8-2002
| Posted on Saturday, June 10, 2006 - 9:35 pm: |
|
Goat373, YES! we love ours and it is a GREAT RADIO! Lon Tech808 CEF808 N9CEF CVC#2 |
Goat373
Intermediate Member Username: Goat373
Post Number: 236 Registered: 3-2005
| Posted on Saturday, June 10, 2006 - 10:15 pm: |
|
any suggestions as to where to find the e-chip?? |
Tech808
Moderator Username: Tech808
Post Number: 10250 Registered: 8-2002
| Posted on Saturday, June 10, 2006 - 10:28 pm: |
|
Goat373, You will need to check the internet auction sites or Ranger Dealer's near you to see if they have any they will part with. Hope this help's, Lon Tech808 CEF808 N9CEF CVC#2 |
Goat373
Intermediate Member Username: Goat373
Post Number: 238 Registered: 3-2005
| Posted on Sunday, June 11, 2006 - 9:25 pm: |
|
Really, thanks for the help Unless i can get the e-chip Seems like i wont get it Shucks, maybe i will, havent decided Interesting prediciment Ah well. |
Goat373
Intermediate Member Username: Goat373
Post Number: 239 Registered: 3-2005
| Posted on Monday, June 19, 2006 - 7:02 pm: |
|
found the echip at a place...29.50...i like the price, get it...2950...lol. got the radio in my hands too...it has the plug for the chip, the guy was just blind. oh well, will be getting that chip tuesday and will post on how she performs when i get it installed and whatnot |
Grimace
New member Username: Grimace
Post Number: 4 Registered: 2-2004
| Posted on Friday, July 07, 2006 - 11:45 pm: |
|
i was thanking of ordering 2950 i was told the eclip is free was i told wrong?? i heard it came with the radio from the factory and should be in the box with the radio |
Grimace
New member Username: Grimace
Post Number: 6 Registered: 2-2004
| Posted on Saturday, July 08, 2006 - 2:16 pm: |
|
why does cooper keep the eclip. thanks |
Penrider
New member Username: Penrider
Post Number: 3 Registered: 1-2007
| Posted on Wednesday, January 17, 2007 - 12:07 am: |
|
dumb Q here...I know how to expand 2970(old style, not dx)..is it even Possible to block out 10meters completely, or just with Memory/Presets????....just curious |
Im4jc
Intermediate Member Username: Im4jc
Post Number: 211 Registered: 11-2005
| Posted on Friday, January 19, 2007 - 1:58 am: |
|
Penrider, You can do this is a round about way. You first have to set the scan limits. When programmed, the upper and lower scan limits will also act as the upper and lower operating limits of the radio. The radio now cannot be programmed to operate above or below the scan limits. Here's how to do it: (1) Press the PRG (Program) key. (2) Press the SCAN key (“PRG SCAN+” should appear in the lower right corner of the display window). (3) Using the SHF key and the (s) Up and (t) Down arrows, select the upper scan limit, then press ENT. (4) Press the SCAN key again (“SCAN-” should appear in the display window). (5) Using the SHF key and (s) Up and (t) Down arrows, select the lower scan limit, then press ENT. The upper and lower scan limits have now been programmed. To activate the scan feature, return the radio to manual operation and press the SCAN button. If the display shows “SCAN+”, the radio will scan from the lower limit to the upper limit. If “SCAN-” is displayed, the unit will scan from the upper limit to the lower limit. To change from SCAN+ to SCAN- or vice versa, press SCAN. So in other words, if you want your radio to operate from, say, 26.735 to 27.555, just follow the above instructions and viola! I personally use 26.735 to 27.555 most of the time, so this works great for me. Have fun |
Caledonia
Junior Member Username: Caledonia
Post Number: 45 Registered: 8-2005
| Posted on Friday, January 19, 2007 - 7:21 am: |
|
If I ordered a 2970 from copper, and I don't want to pay the 30 dollars for the conversion, you are telling me I won't get the E-chip? |
Caledonia
Junior Member Username: Caledonia
Post Number: 46 Registered: 8-2005
| Posted on Friday, January 19, 2007 - 1:11 pm: |
|
I did read it, I was asking again to make sure that that really was your policy. Wow. That's unbelievable. |
Tech808
Moderator Username: Tech808
Post Number: 12773 Registered: 8-2002
| Posted on Friday, January 19, 2007 - 1:55 pm: |
|
It is not Copper Electronics policy but Ranger USA's Policy. As Copper Electronics is a Authorized Ranger Dealer it has to follow the Guidelines / Policy that Ranger USA give's them to follow as a Ranger Authorized Dealer when selling Ranger USA product's to keep your Ranger Factory Warranty intact. If Copper Electronics does the conversion at the time of purchase your Factory Warranty is Good/100% intact. If YOU do the conversion and should any problems arise with the radio then Ranger USA can and has in the past VOIDED factory warranties and removed the conversion before returning the radio to the owner. Lon Tech808 CEF#808/HAM#33 CVC#002 N9CEF
|
Slim1
Intermediate Member Username: Slim1
Post Number: 130 Registered: 4-2002
| Posted on Friday, January 19, 2007 - 3:29 pm: |
|
"If YOU do the conversion and should any problems arise with the radio then Ranger USA can and has in the past VOIDED factory warranties and removed the conversion before returning the radio to the owner." I know this for a fact myself! I wasn't happy either.So,let Coppers do the conversion for you, on this one especially! Slim |
B_d
New member Username: B_d
Post Number: 2 Registered: 1-2007
| Posted on Saturday, January 20, 2007 - 10:15 pm: |
|
I just ordered the 2970DX and just found out you can't modify it without getting the converson so is it to late to add that to my order? MODERATOR NOTE! You will need to contact Suzanne in Customer Servicve MONDAY MORNING at: 1-800-626-6343 or e-mail her NOW at: suzanne@iglou.com to let her know you want the: OPTIONS Expand, align and tune: add 30.00 added to your order. |
B_d
New member Username: B_d
Post Number: 3 Registered: 1-2007
| Posted on Saturday, January 20, 2007 - 10:49 pm: |
|
Ok thanks i just e-mailed her. |
Penrider
New member Username: Penrider
Post Number: 4 Registered: 1-2007
| Posted on Tuesday, January 23, 2007 - 7:50 pm: |
|
Im4jc...sorry it took me awhile to get back on here...thanks, that's about how I figured it would work |