Author |
Message |
Snapperhead
Intermediate Member Username: Snapperhead
Post Number: 241 Registered: 2-2002
| Posted on Friday, September 08, 2006 - 9:36 pm: |
|
Hey guys, I picked up a nice TS-50s.....I performed full TX mod and it worked nice......This might sound stupid, but what's the procedure to get it to LSB mode after the 9.5Mhz cut off....Only USB and CW are working past this freq.....Any info would be appreciated.... |
Unit199
Intermediate Member Username: Unit199
Post Number: 328 Registered: 8-2003
| Posted on Saturday, September 09, 2006 - 3:10 am: |
|
WHAT MOD DID YOU USE? THERE ARE DIFFERENT WAYS TO DO MODS, DEPENDING ON WHAT DATE IT WAS MANUFACTURED. HARVE UNIT199 |
Hyperno_1979
Intermediate Member Username: Hyperno_1979
Post Number: 137 Registered: 12-2005
| Posted on Saturday, September 09, 2006 - 8:04 am: |
|
Check out google. I was after one a while ago to use in my Millenium Falcon and found that not only do you have to know what date is was manufactured i also found that there are different mods for whichever country it was manufactured to be sold in, along with the build date thingy. There are a couple of really good sites listed in google. CEFFFCEF Bob CEF703. |
Snapperhead
Intermediate Member Username: Snapperhead
Post Number: 242 Registered: 2-2002
| Posted on Saturday, September 09, 2006 - 8:34 am: |
|
Hey guys, I did use the old version mod on DefPom, with removing diode D5.......I did correct the problem.....I just needed to do some reading in the manual......It was in the setup menu number 04 and I had to switch to ULC on setup.........73's all |
Unit199
Intermediate Member Username: Unit199
Post Number: 329 Registered: 8-2003
| Posted on Saturday, September 09, 2006 - 10:02 am: |
|
GLAD YOU GOT IT FIGURED OUT. NOW YOU CAN ENJOY. HARVE UNIT199 |