Author |
Message |
Bbmfic
Member Username: Bbmfic
Post Number: 64 Registered: 1-2003
| Posted on Monday, January 08, 2007 - 11:56 pm: |
|
is there a npc/rc mod for the northpoint cbs1000 or any other type mods for them thanks BBMFIC |
Bbmfic
Member Username: Bbmfic
Post Number: 65 Registered: 1-2003
| Posted on Friday, January 12, 2007 - 6:03 pm: |
|
ok here is a different question is there any way to channel these radios or are they rom locked |
Tech808
Moderator Username: Tech808
Post Number: 12712 Registered: 8-2002
| Posted on Friday, January 12, 2007 - 7:17 pm: |
|
Bbmfic, The Channel/Frequency conversion is listed in the: Modification List located to the LEFT of the Forum here. Tools Mic. Wiring Frequency Chart CB & Ham Lingo Modification List Lon Tech808 N9CEF CEF#808/HAM#33 CVC#002
|
Bbmfic
Member Username: Bbmfic
Post Number: 66 Registered: 1-2003
| Posted on Saturday, January 13, 2007 - 11:32 am: |
|
i must be doing something wrong i short the 2 pins & hold the button for more than 5 sec & it stays on the 40 channels any help? |
Tech808
Moderator Username: Tech808
Post Number: 12725 Registered: 8-2002
| Posted on Sunday, January 14, 2007 - 5:21 pm: |
|
Bbmfic, Are you presing the EMG/CH19 Button To CHANGE bands after the conversion? Lon Tech808 N9CEF CEF#808/HAM#33 CVC#002
|
Bbmfic
Member Username: Bbmfic
Post Number: 67 Registered: 1-2003
| Posted on Sunday, January 14, 2007 - 5:48 pm: |
|
yes sir i am & nothing but 40 channel its brand new no one was in it but still no channels |
Bbmfic
Member Username: Bbmfic
Post Number: 68 Registered: 1-2003
| Posted on Monday, January 15, 2007 - 5:21 pm: |
|
i know im not the only one that has this problem is there something else that needs to be done to these radios to get the channels |
Tech808
Moderator Username: Tech808
Post Number: 12737 Registered: 8-2002
| Posted on Tuesday, January 16, 2007 - 10:57 pm: |
|
Bbmfic, Try contacting our Copper Forum Member Robinhood13204 as he is the NORTHPOINT Factory Warranty Repair Center for Northpoint Radio's and he may be able to help. Lon Tech808 N9CEF CEF#808/HAM#33 CVC#002
|
Bbmfic
Member Username: Bbmfic
Post Number: 69 Registered: 1-2003
| Posted on Thursday, January 18, 2007 - 4:26 pm: |
|
im sorry i dont know how to use this forum to find him a little help please thanks bbmfic Moderator Note! You can check your Warranty Papers that came with the radio and it will have the information you need to contact him. Or you can look to the left of the forum here under USER LIST and do a search and it will bring up his profile and e-mail address. |
Timc940
New member Username: Timc940
Post Number: 5 Registered: 3-2007
| Posted on Monday, April 02, 2007 - 8:00 pm: |
|
on my northpoint you need to hold down the power button for about 5 seconds WHILE you are hold down the #1 key.. After this the mod will work, but i need to do it each and everytime i power the radio on . |
Emtb90
New member Username: Emtb90
Post Number: 4 Registered: 12-2007
| Posted on Tuesday, January 01, 2008 - 10:29 am: |
|
i guess no one has the first post on the npc mod or the rc mod for this radio |