Author |
Message |
Waffle
New member Username: Waffle
Post Number: 9 Registered: 4-2003
| Posted on Tuesday, March 20, 2007 - 1:02 am: |
|
Hi all can the Connex 3300HP channel led show what channels your on like 41,42,43,44,45,46,47,48,49,50,51,52,etcc... i had an old 148gtl that did this and i would like to find out what is needed to do this for the Connex 3300HP if its possible |
2600
Advanced Member Username: 2600
Post Number: 588 Registered: 7-2002
| Posted on Sunday, March 25, 2007 - 3:19 am: |
|
Odds are that the old 148 had the "99-Channel" mod installed. You unhook the digits from the channel selector. The selector feeds into the mod's circuit board, and the board feeds the digits. And the PLL chip, too. Lots of wiring. Lots. Haven't seen them for a long time. Considering how the channel digits are wired in your radio, this would be a big deal to do, let alone for someone to design. 73 |
|