Manufacturers
Shop by Brand

Astatic AST-878DM Desk Mic

Astatic AST-878DM Desk Mic
Brand: Astatic
Product Code: A70-05008
Price: $74.99

Available Options


* Microphone Wiring 5 and 6 Pin:

Qty:     - OR -   Add to Wish List
Add to Compare
9 reviews   Rating: 4/5.
Based on 9 reviews   |  Write a review


High quality amplified desk mic. Push to talk and lock to talk buttons, five conductor shielded standard Astatic color coded cable

Requires 9v battery (not included)

The Astatic AST878DM Is a omni directional ceramic desk mic offering a rugged cycloac resin housing for industrial & commercial applications.

The volume can be adjusted with a potentiometer located under the bottom of the mic.

Mic is wired 4pin Cobra/Uniden

SPECIFICATIONS:
Type: Transistorized Ceramic
Output Level: -44dB Below 1 volt per microbar at 1 khz into 1 megohm load
Output Adjustment: Approx. 40db range
Impedance: 5000 Ohms Max., recommended load of 100 ohms and up
Polar Pattern: Omni Directional
Cable: 2 foot coiled 6 conductor including shield
Weight: 19 1/2 ounces
Power: 9v battery or regulated power supply
A70-05008

| 9 reviews
Just received the Astatic desk mic and shipping was a fast 2 days and packed fairly well so arrived in perfect condition. I bought this mic to use on an Alinco SR-8T H.F. rig while I restore my Turner SSK. In the mean time I tested the mic as pre-wired on my Uniden Bearcat 880. Initially it seemed the PTT was not doing anything but after a few presses of the bar it began working as it should. Using the talk back feature of the 880 I could hear the audio quality of the mic was loud, crisp and clear. "Had to turn down the talk back". Next I made several local contacts on a few channels and got good reports on the sound of the mic. Next will be the test of time to see how the mic holds up and I will probably build an adapter to use it on the Alinco and preserve the ability to continue to use the mic with 4 pin CB radios.
| 9 reviews
great microphone good loud smooth modulation just as good as turner astatic d104,or silver eagle and I have them all.
| 9 reviews
I've had three of these and after a while they start scratching when you key up . The switch inside is JUNK... Other than that it is a great mike ..If they would replace that with a quality switch. That would be great....
| 9 reviews
I have 2 of these, one on my Ranger 2980 and the other on my Cobra 2000, and I also use it on my Cherokee CBS 1000. For a plastic unit, it is well made and strong. As far as performance, I like it better than my turner plus 3 and equal with a D104. My radios sound great with this mic, very clear and loud!
| 9 reviews
Had it two years now. Still Love it.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Captcha



Powered By Iglou Internet Services, Inc.
Copper Electronics, Inc. © 2024