Copper Talk » Ask The Tech » General Technical Questions » Swr problem « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Massappeal
Junior Member
Username: Massappeal

Post Number: 33
Registered: 6-2008
Posted on Tuesday, October 09, 2012 - 9:47 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
Trying to figure out which is the problem. The antenna or the coax. Over the.last two weeks I have been Having a high swr 2.5 to 3 on occasions. Then at other times its a flat match. The antenna and.coax are probably 5 years old at the most they are Imax 2000 and the 400 low.loss cable copper sells. What testing can be done to determine which is the problem? Thanks for your help.
Top of pagePrevious messageNext messageBottom of page Link to this message

Hotwire
Senior Member
Username: Hotwire

Post Number: 2799
Registered: 1-2005


Posted on Thursday, October 11, 2012 - 4:41 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)
I would try new amphenol pl259 connectors on each end to start and take a close look at your jumpers. Hard to beleive an Imax at five years is going bad unless it was abused with to much power or severe weather damage somehow. Good Luck
Kenny
CEF491
Reading the mail around Indianapolis Indiana!

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: