Copper Talk » Ask The Tech » General Technical Questions » Calibation Dosy tc- 4001 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tripledeuce
Junior Member
Username: Tripledeuce

Post Number: 12
Registered: 12-2004


Posted on Monday, February 13, 2006 - 2:04 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

Does any have the calibation instuction for a tc-4001

73'
Top of pagePrevious messageNext messageBottom of page Link to this message

1861
Intermediate Member
Username: 1861

Post Number: 452
Registered: 2-2004


Posted on Monday, February 13, 2006 - 2:58 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

MINE WAS WAY OFF , I CALIBRATED IT WITH ONE I TRUST -- THE POTS ARE ALL MARKED ( 4000, 2000 , 200 , 20 , AND SWR ) TOP TO BOTTOM
Top of pagePrevious messageNext messageBottom of page Link to this message

Pogo12
Junior Member
Username: Pogo12

Post Number: 43
Registered: 3-2005
Posted on Sunday, June 25, 2006 - 1:36 pm:   Edit Post Delete Post    Move Post (Moderator/Admin Only)

If yours is not marked as was the case with the older tc4001s then heres how they are set up.Turn the meter so that the face is facing to your left.On the pc board You will see 3 pots at the top and 2 right below them.Starting from the top left and going right you have a 2000watt pot/200watt pot/20watt pot.at the bottom left is your 4000watt pot and to the right is your mod set line pot.The older meters were hard wired(soldered) to the pc board and the new ones have plug in wires.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action: