Author |
Message |
Charliebrown
Junior Member Username: Charliebrown
Post Number: 44 Registered: 10-2002
| Posted on Wednesday, October 28, 2009 - 7:03 pm: |
|
I have the new 2995 dx that has the smaller transformer and mosfets. My question is how can you disable the amp in this radio to make it a straight radio, to drive a solid state amp that is not a high drive? Then when you are not using the external solid state amp, switch it back to the 2995 amp. In short a switch mod for the amp. Does anyone know or have this information? |
Dale
Senior Member Username: Dale
Post Number: 1508 Registered: 12-2002
| Posted on Wednesday, October 28, 2009 - 8:18 pm: |
|
imho i think youd be further ahead performance wise to get a amp that can handle that radio texasstar500 will if your carefull texastar sweet sixteen will need a huge power supply though dale/a.k.a.hotrod cef426 cvc#64
|
Charliebrown
Junior Member Username: Charliebrown
Post Number: 45 Registered: 10-2002
| Posted on Wednesday, October 28, 2009 - 9:07 pm: |
|
Dale, I have a 500v but I also have other amps that I like to use from time to time. Sometime II like to switch out amps between my truck and base when I am on the road. It would make it more convient when I use my equipment this way. There was a switch mod for the amp on the older 2990 dx ,but I do not think it would be the same and I can not find this information on the 2995 dx. That was a good idea Dale and I thank you for your response to my question. |
Charliebrown
Junior Member Username: Charliebrown
Post Number: 46 Registered: 10-2002
| Posted on Sunday, November 01, 2009 - 7:57 am: |
|
I did a temp. bypass from the radio output (not the amp) to the antenna and found out that the 2995 dx will only put out a couple of watts. I wass glad that I did not install any switches for this mod would be a wast. I also found out that the new 2995 dx has one final less than a regular 2950 dx or the 2985 dx. This could be why the low output from the radio itself. So, my advice would be to forget the bypass mod of this radio. If anyone has any other information that is better or different, let me know. |
Dale
Senior Member Username: Dale
Post Number: 1511 Registered: 12-2002
| Posted on Sunday, November 01, 2009 - 12:16 pm: |
|
well ive been told many times that its a wadste of time to disable the internal amp.all ya need to do is adjust the correct variable resistors[vrs]was also told to just buy a 2950 and save yourself a few hundred dollars dale/a.k.a.hotrod cef426 cvc#64
|