Author |
Message |
Normjody100
| Posted on Wednesday, October 15, 2003 - 6:17 am: |
|
whats the wiring code for a d104 silver eagle to a cobra 2000 Forum Master Note : I have added a microphone wiring guide to the forum menu. It's listed under the "Tools" heading.
|
307
| Posted on Wednesday, October 15, 2003 - 9:24 am: |
|
1) White 2) Shield 3) Black (RX) 4) Blue 5) Red (TX) 307 |
Sg569
Intermediate Member Username: Sg569
Post Number: 208 Registered: 12-2004
| Posted on Friday, August 12, 2005 - 5:57 pm: |
|
ok, I just picked one of these up last night, wired it this morning and Now I have a problem. Wired it for 5 pin Cobra/ Uniden. Problem is I have no modulation. I tried using the battery out of my mobile pwr. mic (didn't work, batt is still good but no workee); Yes, I tried talking into the mic and turning the pot on the bottom No change. Any ideas anyone??? Thanks sg569 |
Tech808
Moderator Username: Tech808
Post Number: 6645 Registered: 8-2002
| Posted on Friday, August 12, 2005 - 6:11 pm: |
|
Sg569, DOUBLE check your wiring. It Should be: PIN #1 ~ WHITE PIN #2 ~ SHIELD PIN #3 ~ BLACK PIN #4 ~ BLUE PIN #5 ~ RED YELLOW N/C Then check your Volume Control on the Bottom of the mic to make sure it is not off. If it is an older mic you may also need to clean the contacts on the piano switches in the base of the mic if it has not been used for awhile. Also try a New Battery. Hope this helps, Lon Tech808 CEF808 N9OSN |
Sg569
Intermediate Member Username: Sg569
Post Number: 210 Registered: 12-2004
| Posted on Saturday, August 13, 2005 - 12:12 pm: |
|
I shall and thank you, Lon. I turned the volume both ways when testing it; did not clean the switches( mic does key the radio.) I'll keep trying, and thanks again. sg569 |
Sg569
Intermediate Member Username: Sg569
Post Number: 216 Registered: 12-2004
| Posted on Sunday, August 14, 2005 - 11:46 am: |
|
I got it working, it had a bad contact. I fixed it and now it talks. Thanks all sg569 |